Driver Kit for Burleigh PZAT Actuator
EXFO Burleigh Products Group PZAT Series Aligner/Translators have provided phase shifting in many custom built interferometers. The Models PZ-80 and PZ-90 are well suited for visible wavelength phase shifting at 0 to 100 volts. The Model PZ-80 is part of the phase shifting reference mirror attachment of the Buccini Instrument Company MIC-1 interferometer.
Diffraction International’s PZAT Driver Kit provides everything you need for our Durango Interferomery Software to drive a PZAT Series Aligner/Translator at 100 V. The Burleigh Aligner/Translators have three matched PZT tube segments mounted 120° apart. The adapter cable connects these PZT segments in parallel to provide tilt-free translation from the single-channel driver.
| Burleigh PZAT Specifications | ||||
|---|---|---|---|---|
| Model | PZ-80 | PZ-81 | PZ-90 | PZ-91 |
| Clear Aperture | 14.7 mm | 38.1 mm | ||
| Translation at 1000 V | 6.0 µm | 2.0 µm | 6.0 µm | 2.0 µm |
| Translation at 100 V | 0.6 µm | 0.2 µm | 0.6 µm | 0.2 µm |
| Non-Linearity | 5% | <1% | 5% | <1% |
| Connector | Adapter cable for RG-93 LEMO | |||
Kit Contents (clockwise from upper right):
- National Instruments NI-DAQ software
- National Instruments Model PCI-6024E 12-bit, PCI-bus DAC Card
- 68-pin to BNC adapter (wired to channel 0)
- BNC cable
- Low voltage amplifier, 0-10 V input (BNC), 5-100 V output (20 mA)
- Power supply, 120 VAC to 12 VDC, 3.5 mm plug
- Adapter cable, LEMO plug (coaxial) to LEMO RG-93 (8-pin).
See also: PZT Linear Stage
