Durango NIDAQ/IMAQ Hardware Kit
This is our basic Durango hardware kit and is usually available for immediate shipment.
The 4-channel IMAQ 1409 board will acquire monochrome images from any standard or non-standard video camera. Digitization is software selectable at 8 or 10-bit.
The NIDAQ 6024E board will drive most low voltage (10V) phase shifters. If necessary, a 10X or 100X voltage amplifer may be added. On request, we will include a plug adapter from LEMO-to-BNC or LEMO-to-TNC (for MiniFIZ).
| Kit Contents |
System Requirements |
- National Instruments PCI-6024E data acquisition board with 12-bit ±10
V analog out
- NI-DAQ driver software
- Measurement and Automation Explorer hardware configuration software
- Custom 64-pin to LEMO adapter with flying leads for remote triggering
- LEMO cable, 2 meter
- National Instruments PCI-1409 monochrome 8-bit/10-bit image acquisition board
- NI-IMAQ image acquisition driver software
- BNC video cable, 2 meter
- National Instruments RTSI
bus cable for synchronization of NI-DAQ and IMAQ boards.
- Pricing
|
Interferometer
- Standard or non-standard video source on BNC
- Voltage or current controlled phase shifter
- HV amplifier if greater than 10 V is required.
Desktop Computer
- Microsoft Windows XP/2000/NT/98
- 1.0+ GHz, 256MB RAM (512MB recommended)
- Two available PCI slots
- Display with minimum 24-bit color
- Parallel or USB port (for hardware key).
|
